LED Engine Compartment Light


Designed for illumination of engine components in automotive applications such as transit buses, school buses, and commercial transport vehicles.


  • 2 LED lights provide bright and uniform light distribution for easy illumination of engine parts in high heat areas.
  • Aluminum die cast construction and water and dust proof rated to IP67 for increased durability and product life.
  • Rated to an operating temperature range of -40°C to +115°C (-40°F to +239°F) to withstand extreme cold and high heat applications.

Product Specifications

Input Voltage: 6 Vdc to 30 Vdc (12 Vdc to 24 Vdc, Nominal)
Current: 445 mA Maximum at 12 Vdc; 340 mA Maximum at 16 Vdc
Emissions: Complies with FCC Part 15B and ICES-003 Issue 5
Sr: A is POS; B is NEG (Reverse Polarity Protection)
Connector Required: APTIV 2-way Black Weather Pack Shroud Sealed Male Connector
APTIV Weather Pack Male Sealed Tin Plating Tang Terminal
APTIV Loose Round One-Way Cable Cavity Seal
Protective Sleeve: Split Loom with Cable-tied Ends
Lens Material: Polycarbonate
Housing Material/Finish: Aluminum die cast/Black
IP Rating: IP67
Standards: Complies with SAE J575
Operating Temperature: -40°C to +115°C (-40°F to +239°F)
LED Colour Temperature: 5000 K to 8000 K
Number of LEDs: 2
Light Output: 385 lm minimum


Weight: 168 g (5.93 oz)
Width: 2.76 in. (70.00 mm)
LED: 1.83 in. (46.50 mm)
Wire Harness: 9.06 in. (230.00 mm)
Unite Interactive